THIS KIT IS CUT TO ORDER - PLEASE ALLOW 7 DAYS FOR CUTTING AND PACKAGING BEFORE SHIPPING UNLESS YOU CONTACT ME FIRST - SIZES OTHER THAN LARGE WILL HAVE A SLIGHTLY LONGER DELAY AT THE MOMENT WHILE I ADJUST THE MODIFICATIONS
This is the pattern directly from Zweihammer's CAD files, there have been some layout modifications to adapt to my cutting equipment (plasma instead of water-jet or laser depending on where he was outsourcing to).
Face plate is cut from 1/4" Mild Steel and was designed by me..
Rivets and instructions are included.
Parts come flat, with brow band curved to aid in packing. Crest and rear slats can be pre creased for an additional fee and delay in shipping time.
12ga and 14ga Mild Steel are available.
Edge and surface clean up is recommended (file and sanding block/sponge)
The four sizes offered are:
- Small (for brows measuring 21 1/2" to 22 1/2")
- Medium (for brows measuring 22 1/2" to 23 1/2")
- Large (for brows measuring 23 1/2" to 24 1/2")
- Extra Large (for brows measuring 24 1/2" to 25 1/2")
Helm kits are geared toward SCA requirements and allow room for at least minimum padding in these size ranges. With room at the top of the scale for 1/2"+ close cell, 3/4"+ at the middle and 1"+ at the bottom. This means that if your brow measurement falls to 23 1/2" you have a choice of a Medium with room for 1/2"+ or a Large with room for 1"+.
Small variables in front to back and side to side ratios can be affected in the forming of the kit.