Due to Aluminum Pricing changes all shield prices have been adjusted to reflect new raw material costs.

Welcome to the Workshop

Armory

SCA Related goods

Grid List

Set Descending Direction

16 Item(s)

  1. Shield Shapes
    $0.00

    Shields are custom cut and crafted from .090" 6061-T6 Aluminum to meet your specifications. Shield bosses are 6" aluminum hemispheres that are welded on. If the below options don't meet your needs please contact me and I will see what I can do to help.

    Prices are based on the size of the blank needed and options selected.

    As each order is custom made by me please allow 2 weeks for plain and 4 weeks for powdered orders unless confirmed beforehand. 

    I do my best but it is hard to tell based on life interruptions and events.

    Before ordering a powdered design please contact me and send me a copy of the design for review to determine if the Artwork fee applies.

    The white edging can be dyed for other custom colors, please contact me if you are interested in a different color for your shield.

    Examples can be seen on Flickr and Facebook

    Learn More
  2. Stainless parts
    $260.00
    SCA helmet kit created by Zweihammer Armory based off of the Valsgarde 6 burial find. Learn More
  3. Square channel profile example
    $0.00

    These are a single piece square channeled pavise.

    To start with the same shape options as the regular shields are available, feel free to contact me about other options and I can get them added to the list.

    These are limited to 36" in the direction of the channel.

    The channel is 6" across and 3" deep.

    Shields are custom cut and crafted from .090" 6061-T6 Aluminum to meet your specifications. If the below options don't meet your needs please contact me and I will see what I can do to help.

    Prices are based on the size of the blank needed and options selected.

    As each order is custom made by me please allow 2 weeks for plain and 4 weeks for powdered orders unless confirmed beforehand. 

    I do my best but it is hard to tell based on life interruptions and events.

    Before ordering a powdered design please contact me and send me a copy of the design for review to determine if the Artwork fee applies.

    The white edging can be dyed for other custom colors, please contact me if you are interested in a different color for your shield.

    Examples can be seen on Flickr and Facebook

    Learn More
  4. Channeled shield - Peaked heater (with flat sides)
    $0.00

    These are a single piece channeled pavise.

    To start with the same shape options as the regular shields are available, feel free to contact me about other options and I can get them added to the list.

    These are limited to 36" in the direction of the channel.

    The channel is 8" across and 3" deep.

    Shields are custom cut and crafted from .090" 6061-T6 Aluminum to meet your specifications. If the below options don't meet your needs please contact me and I will see what I can do to help.

    Prices are based on the size of the blank needed and options selected.

    As each order is custom made by me please allow 2 weeks for plain and 4 weeks for powdered orders unless confirmed beforehand. 

    I do my best but it is hard to tell based on life interruptions and events.

    Before ordering a powdered design please contact me and send me a copy of the design for review to determine if the Artwork fee applies.

    The white edging can be dyed for other custom colors, please contact me if you are interested in a different color for your shield.

    Examples can be seen on Flickr and Facebook

    Learn More
  5. Valsgarde 6 Bar Face retrofit
    $0.00

    The parts that were created for the Bar face Valsgarde 6 helmet to apply to a previous version of the kit.

    • face plate (1/4" steel plate)
    • nasal (choice of 12 or 14 gauge)
    • rivets (longer rivets for attaching face grill)
    • shortened cheeks choice of 12 or 14 gauge

    The holes on the face plate/grill wiill work with the stock brow band and cheeks, the nasal has been re-shaped and has a different hole pattern to be lower profile.

    Learn More
  6. 12ga Large - Assembled
    $130.00
    SCA helmet kit created by Zweihammer Armory based off of the Valsgarde 6 burial find. With modifided bar face.

    THIS KIT IS CUT TO ORDER - PLEASE ALLOW 7 DAYS FOR CUTTING AND PACKAGING BEFORE SHIPPING UNLESS YOU CONTACT ME FIRST - SIZES OTHER THAN LARGE WILL HAVE A SLIGHTLY LONGER DELAY AT THE MOMENT WHILE I ADJUST THE MODIFICATIONS

    Learn More
  7. 12ga Large
    $410.00
    ASSEMBLED SCA helmet Assembled by GreyCat Armory, based on a kit by Zweihammer Armory that draws off of the Valsgarde 6 burial find. Bar face is made from 1/4' Mild steel plate Padding and chin strap are required to meet SCA combat rules. (not included) Please select the size you would like, and enter in the requested measurements so that I can adjust the build to fit your head. If you are on the border, the next size up will allow for more padding options to get the fit just right. See picture at left for measurement locations. For a better fit, please include a side profile picture of your whole head so I can work in any other adjustments that may be needed. This will allow me to better adjust the faceplates and neck slat curve. Please allow 4 to 8 weeks for delivery of this item. I will contact you with an initial estimate when the order is placed based on the current work queue. I will also contact you if I have any questions during the build or if I need other measurements. Learn More
  8. Assembled 12ga XL
    $460.00

    This is the pattern directly from Zweihammer's CAD files, there have been some layout modifications to adapt to my cutting equipment (plasma instead of water-jet or laser depending on where he was outsourcing to).

    Rivets are included.

    12ga is available.

    The four sizes offered are:
    Small (for brows measuring 21 1/2" to 22 1/2")
    Medium (for brows measuring 22 1/2" to 23 1/2")
    Large (for brows measuring 23 1/2" to 24 1/2")
    Extra Large (for brows measuring 24 1/2" to 25 1/2")

    Helms are geared toward SCA requirements and allow room for at least minimum padding in these size ranges. With room at the top of the scale for 1/2"+ close cell, 3/4"+ at the middle and 1"+ at the bottom. This means that if your brow measurement falls to 23 1/2" you have a choice of a Medium with room for 1/2"+ or a Large with room for 1"+.

    Small variables in front to back and side to side ratios can be affected in the forming of the kit.

    Please allow 4 to 8 weeks for delivery of this item. I will contact you with an initial estimate when the order is placed based on the current work queue. I will also contact you if I have any questions during the build or if I need other measurements. Learn More
  9.  Medium 14ga
    $390.00
    ASSEMBLED SCA helmet Assembled by GreyCat Armory, based on a kit by Zweihammer Armory that draws off of the Valsgarde 6 burial find. Padding and chin strap are required to meet SCA combat rules. (not included) Please select the size you would like, and enter in the requested measurements so that I can adjust the build to fit your head. If you are on the border, the next size up will allow for more padding options to get the fit just right. See picture at left for measurement locations. For a better fit, please include a side profile picture of your whole head so I can work in any other adjustments that may be needed. This will allow me to better adjust the faceplates and neck slat curve. Please allow 4 to 8 weeks for delivery of this item. I will contact you with an initial estimate when the order is placed based on the current work queue. I will also contact you if I have any questions during the build or if I need other measurements. Learn More
  10. ABS demi leather covered
    $55.00

    These SCA Heavy Fighting Demi-Gauntlets are crafted from 1/8" thick ABS plastic that is heat formed into shape. They are then covered in garment weight leather and strapped with cored paracord. Ready for padding and heading out on the list field. The bell is not riveted closed so that adjustments can be made by the buyer.

    They can be formed for medium or large hands. The Medium size fits my hands that are 10" around at the widest point with the thumb tucked.

    Learn More
  11. abs demi
    $30.00

    These SCA Heavy Fighting Demi-Gauntlets are crafted from 1/8" thick ABS plastic that is heat formed into shape. Ready for covering of your choice, padding and heading out on the list field. The bell is not riveted closed so that adjustments can be made by the buyer.

    They can be formed for small, medium or large hands. The Medium size fits my hands that are 10" around at the widest point with the thumb tucked.

    Learn More
  12. Topf Helm Kit
    $90.00

    This is the pattern directly from Zweihammer's CAD files, there have been some layout modifications to adapt to my cutting equipment (plasma instead of water-jet or laser depending on where he was outsourcing to).

    Rivets are included.

    12ga is available.

    The four sizes offered are:
    Small (for brows measuring 21 1/2" to 22 1/2")
    Medium (for brows measuring 22 1/2" to 23 1/2")
    Large (for brows measuring 23 1/2" to 24 1/2")
    Extra Large (for brows measuring 24 1/2" to 25 1/2")

    Helm kits are geared toward SCA requirements and allow room for at least minimum padding in these size ranges. With room at the top of the scale for 1/2"+ close cell, 3/4"+ at the middle and 1"+ at the bottom. This means that if your brow measurement falls to 23 1/2" you have a choice of a Medium with room for 1/2"+ or a Large with room for 1"+.

    Small variables in front to back and side to side ratios can be affected in the forming of the kit.

    Learn More
  13. back of hand, closed
    $80.00

    This is the pattern directly from Zweihammer's CAD files, there have been some layout modifications to adapt to my cutting equipment (plasma instead of water-jet or laser depending on where he was outsourcing to).

    Rivets, washers and instructions are included.

    18ga Mild Steel

    From Zweihammer:
    With regard to gauntlet size, I have hands that measure 8 inches from the heel of my palm to the tip of my index finger, 3 3/4 inches across the knuckles and 4 3/4 inches across the heel of my palm. Typically, I always wear large gloves. I fight in the larger size with Wells Lamont gloves attached and 3/8 gamboised padding on the back. I fit the larger size fine with a little to spare.

    The small size is 7/8ths the size of the large and I cannot pass my hand through the cuff with a glove attached and though it fits my bare hand it leaves no room for glove or padding. This size fits my wife fine and also seems to fit the average sized fighter who wears medium gloves.

    The kit can be formed somewhat narrower/deeper or wider/shallower to compensate a bit. Padding and glove thickness helps as well.

    I have created another size that is in the middle of these two, because that is where my hands seem to fit.

     
    Learn More
  14. Black Edging
    $1.25

    Sold by the foot this edging is sized (3/32") to fit the .090" aluminum that we use for our shields.

    Available in Black or White, both with a sand texture finish. A 26"x32" heater shield will use almost 9' of edging.

    The white is dye-able with a spirit leather dye for other custom colors please contact me if you are interested in pre-dyed edging.

    Learn More
  15. Trio of images of the kit
    $110.00
    SCA helmet kit created by Zweihammer Armory based off of the Valsgarde 6 burial find. Learn More
  16. Assembled showing thumb
    $140.00

    These are cut to order, please allow 14 days for cutting and packaging before shipping.

    This is the pattern directly from Zweihammer's CAD files.

    Rivets, washers and instructions are included.

    18ga Stainless

    From Zweihammer:
    With regard to gauntlet size, I have hands that measure 8 inches from the heel of my palm to the tip of my index finger, 3 3/4 inches across the knuckles and 4 3/4 inches across the heel of my palm. Typically, I always wear large gloves. I fight in the larger size with Wells Lamont gloves attached and 3/8 gamboised padding on the back. I fit the larger size fine with a little to spare.

    The small size is 7/8ths the size of the large and I cannot pass my hand through the cuff with a glove attached and though it fits my bare hand it leaves no room for glove or padding. This size fits my wife fine and also seems to fit the average sized fighter who wears medium gloves.

    The kit can be formed somewhat narrower/deeper or wider/shallower to compensate a bit. Padding and glove thickness helps as well.

    I have created another size that is in the middle of these two, because that is where my hands seem to fit.

     
    Learn More

Grid List

Set Descending Direction

16 Item(s)